SAT1 is a self-amalgamating, highly adhesive synthetic rubber and resin-based
tape that 'cures' into a single mass upon application. Designed for durability,
it is ideal for sealing, waterproofing, and insulating applications.
Features
Highly resistant to hostile environments.
Ideal for sealing, waterproofing, and insulating
applications.
High mechanical strength—consider SAT2 for additional
strength needs.
Colour: Black.
Technical
Specifications
Dimensions: 20mm x 5m.
Material Composition: Butyl rubber-based adhesive.
Continuous Operating Temperature: -30°C to 70°C.
Short-Term Exposure Temperature: Up to 100°C (max. 2
hours).
Breakdown Voltage: 30 kV/mm.
Elongation: 1000%.
Tensile Strength: 0.5 N/mm² (standard); 0.7 N/mm²
after 96 hours at 100°C.
Application
Guidelines
Remove the separator and stretch the tape gently to reduce
its width by 4-5mm during application.
Wrap with a 50% overlap to ensure proper sealing.
Avoid air entrapment while applying.
In cold weather, warm the tape to room temperature before
use.
Store away from direct sunlight, especially in hot weather,
to prevent difficulties in removing the separator.
Compliance
Standards
Conformant with UL, NEMA, IEC, and JIS standards.
Usage
Note
For applications requiring filling or shaping, mould the
tape beforehand to avoid air entrapment.
For surface insulation, use SAT2 tape.
Packaging
Dimensions: 1mm thickness, 20mm width, 5m length per roll.